How to make a Fabric Pot in 5 minutes?

Easy DIY fabric pot

This tutorial shows how to make a fabric pot in 5 minutes.

With only 6 seams, any beginner can make a beautiful fabric pot. Follow the 12 steps below !

soft cosy fabric pot

The easiest way is explained here ! Have fun !

What you need :

  • a sewing machine
  • 2 rectangles of fabric (any size)
  • thread
  • needles
  • an iron and iron table

1. Cut 2 rectangular shapes from fabric

Cut the fabric in 2 rectangle shapes (cutting on top of each other helps to make sure they are the exact same size).

Make sure the rectangles’ shapes are quite long (a square shape wouldn’t work). Here’s an example of the result you can get depending of the shape of your fabric at the start.

Fabric pot shape

For my project, the rectangle shapes are quite long.
DIY fabric pot



2. Sew one of the long side rectangle.

Put fabric’s right face on each other and sew one of the longest side.

sewing DIY


3. Iron the seam to flatten it

ironing fabric


4. Fold the fabric in two as shown

DIY fold the fabric

fabric on iron table


5. Sew the sides together

easy sewing machine


6. Flatten the seam with the iron

flatten the fabric


7. Fold the fabric back together and flatten the seam again.

It creates a kind of pocket.

easy sewing project


8. Sew each layer of the remaining side together

fun fabric stitches


9. Measure the width of the “pocket”

In this example my pocket measures 16 inches wide. That means that the fabric pot (once finished) will measure 8 inches on each side.

measurement fabric pot


10. Open the pocket and flatten the bottom in a kind of diamond shape.

Let each side fall back inside and flatten the corners of a diamond shape.

Place needles on opposite corners as shown below. Each seam must measure 8 inches long (or half the length of the pocket you measured before).

easy pocket fabric

Each opposite corners have been sewed.

fast diy fabric box


11. Now you can open your box !!

Turn it over so that the 2 triangle wings move inside.

diy beginner level

That way, the seams are inside, hidden by the 2 triangles. No visible seam  at all !

easy free sewing DIY


12. Sew the bottom of the box and the triangles together

easy step by step tutorial

RESULT : Tadaaam !! Fold down the box top and your sweet pot is finished !!

Congratulations !

sewing DIY for beginner


Your Fabric Pots can look like that :

Nice, don’t you think ?

simple sewing fabric pot

Little trick :

In order to reinforce the pot, I added a carpet square on the bottom. That’s for the “cosy” final touch !

soft cosy fabric pot

socks fabric box

pantys fabric pot

I hope you enjoyed this tutorial and that it was understandable. If you have any questions or remarks, feel free to ask through the comments below.

I look forward to seeing your beautiful boxes ! It would look fabulous with pattern fabric !

A bientôt !! : )


DIY : fabric on can

In the following posts, I’ll show you how to customize your interior decoration with very low budget.

Today : how to create a decorative pen holder.

What you need :

  • Fabric patterns (old second hand cushion covers are so cheap and perfect for that)
  • Scissors
  • Double sided tape
  • Can, any size
  • Iron
Here s the fabric I’m gonna use :


  1. Cut the fabric in the same height of your can adding 2 centimeters. Make sure the length is longer than the perimeter of the can. Reverse each side one centimeter inside and iron it flat.
  2. Add some double sided tape around the top and the bottom of the can. Add a straight tape line too.
    Double sided tape
  3. Remove the other side of the tape and start sticking the fabric on the can along the straight tape, and all around the can. Make sure the fabric is well tight for a better looking.
  4. To finish to stick the fabric on the can, place another straight double sided tape on the already stuck fabric. Cut the left over fabric so that it will come just above the tape. Stick the fabric on the tape. Press strongly.
  5. Congratulations it is finished !

This post is shared on: